Separate names with a comma.
I would recommend Philpots. Used them few times now for pitted/rusted fork tubes.
BSD is where i was also planning to go.....had few very good feedback from them
Slip-ons, valve/motor removed, DP ECU and i always had the flat spot on my SF848....just learned to live with it. But it does not answer your...
I have relocated the mirrors at the end of the bars.....i can see behind now and i do not get any vibrations :)
On the way to Modena for the Ferrari museum, you could do a little detour to the Lamborghini museum?!
You may want to have a look at the full thread but had some starting issues too on my monster too. I would like to also add that a bad earth from...
Had SWB T4 with barn doors and now drives a LWB T5 with Tailgate (5Cyl 2.5l, 140BHP). I traveled many times with 2 bikes. I prefer the Tailgate...
GLWS
I do not think it would last..... looking at Electrolube ER2223, which chemically resistant Epoxy resin.
it turns out the fuel pump is perfectly working. It is down to the fuel pump harness...got intermittent continuity on the fuel pump and not...
My plan all along :upyeah: Just fed 12V the pump and guess what......not a single noise/move....I think I am on the right track. That would...
[img] I am doomed with bikes not willing to start.....suspected failed starter. I am about to put it back together shortly.
good thinking but nope, if those switches were faulty the starter would not even crank
Got a poorly one at the moment but I find her very comfy and plenty fast compared to today's standards
Yes I think it is the fuel pump/sender......I am getting 12V up to the connector on the bike side but I am not hearing the pump priming.....I will...