Separate names with a comma.
but does the front have Chinese brembo parts ?
In that case the seal on the piston has reacted with the brake fluid and swelled causing the piston the seize. I have seen this before.
5.1 is hygroscopic which means it takes on water from the atmosphere, this rusts the master cylinder piston which then seizes in the piston bore....
The ones from stein are PS15 castings but bored PS12 so the "nose" of the casting is a little longer than the original PS12. I have sold dozens of...
:-) ha ha
Small hoover belts are popular ...
I used to keep all the Ariete stuff but so much of it used to get returned because it snapped after a short while i gave up . People were getting...
Sorry . i get what you are trying to do but your method doesnt really show anything. If the frame was put in a jig no way would they be measuring...
try putting a thick washer under the head of the screw holding the clutch spring or get some stronger springs. suflex used to do uprated spring...
https://www.stein-dinse.com/en/ducati-tang-for-speedometer-drive-veglia-bevel-drive/item-2-1428020-speedo+drive--2.html Don't ever bother with...
Also dont forget to expel the air in the tubes or you will get a lock. slacken the screws in the top nuts and bounce the forks as far as you can...
185cc is correct tube length should be 600mm Forks should be fully extended with the weight of the bike on them ( not the rider) stiction is a...
Have a chat with https://www.allbikeengineering.co.uk/discs.php or fill out a job card for a quote Paddy
The SS can be really picky about mixture screw position so dont think 1.5 turns or 2 turns, think 1.5 or 1.6 turns. :-) Getting the pump volume...
Drop me an email and i will give you an address.
