Separate names with a comma.
Lots of testing going on. Both swingarms have been cut and welded. Sorry - so long... I had a stroke. Yep - 1.2 G stops will aggravate an old...
Short update. I have had a time with the welder. That will work out. Gearing has become quite hard. Every time I put a set together it wants to be...
Tools: [ATTACH] [ATTACH] [ATTACH]
All the way forward and all the way back. The full forward will not be used. Call that :15 after the sweet spot is :20 to :40 in order to maintain...
Ok trough with experimenting. Here are the final cuts and fitting of the SF swingarm It can be adjusted from 510mm to 540. With the 200/60 or the...
About a month out.
Back to the cutting and chopping. I opened up the Donor arm wider than I needed to in order to see inside and measure. I have also used a this...
I have a company cutting me 20 pair with 2 holes. They use waterjet to cut so edge will be real smooth.
Without starting a new thread has anyone access to these weld on perch replacements? [ATTACH]
What arm length? Beautiful work.
Here is the response from my access to Pierbon. I am in the wrong business. [ATTACH] [ATTACH]
Sev - Excellent response, thank you. You are right about something different coming from the rear. With the flatter chain angle the tire spun up...
Tire clearance for 1. I have an RS coming through trade. But that will be a while. Lets put it this way. I am not changing platforms at my age and...
Might still have to try the BST...
A tale of two bikes. I thought my 1098s with its custom tuned suspension and go fast goodies was an ornery mule that had to be manhandled. It...
