Separate names with a comma.
thanks Chris!
Thank you everyone.looks like 10.5 I.D x 1.6 Viton O Rings,sourced some via Simply Bearings,for anyone struggling in future.around £12 for two...
yes i would be very happy with that kind sir. if they are around 14mm O.D 10.5-11 I.D and round 1.6 thickness they will do the job,can message...
Thanks Chris.Mine are around 14mm wide,maybe 10.5 I.D and 1.6ish thickness,the rings for the push fit fittings seem to be for the female side on...
looks like Ducati spares for the 749 are now done,which makes life a little more challenging. Put in new Battery cables and that was a tw2t of a...
Thanks again! kit bought and fitted. And yes, a complete tw2t of a job! worse than the 748 ECU, no idea if anyone else found that the solenoid...
749 will not fire up in the cold, turns over and pops from time to time, new battery fitted ,of course. thinking cables, and reading the old Exige...
DONE. after pulling the tank and fuel systemm to bits i now at least have a cleanish tank. REAR COIL was the issue, replaced and running better...
excuse the ignorance, but how do you read the coils and what is complete earth?I have a multimeter but no skill set there at all.
thanks again Chris, no problem at smooth mid rev range, maybe a bit of popping but 6000rpm or so is good, but throttling off it gets bogged...
that 'spring part' i think is called a Thermistor, does anyone know what those thin retaining discs are called? I managed to push one back over...
OK. Both plugs still sparking fine, so coils are good. took the tank off and despite the service notes saying it had been treated for rust it was...
Finding it impossible to get coils. BERU have stopped making them and even their aftermarket version.Scoured the internet.Anyone have any or know...
