Separate names with a comma.
Totally agree - see below Ceramic Coating | Ducati Forum
I use the Iconic Mount - now with metal parts as the plastic ones broke - twice, service can be slow but the product is good. When mine broke I...
Re the front Brake I agree, there is a microswitch there, just a plunger type, but even if the switch is held in the closed / depressed position...
My guess is that it turns off the ACC when it is engaged.
I'll complicate this a bit more :) Bike switched on but not started. If I hold the rear brake microswitch up with a thin screwdriver, so it does...
As we all know the back end of the V4's can get very dirty very quickly on the wet and crappy UK roads. Recently I had given my V4S a proper clean...
I had this problem on my 1260 and ended up bending the spring steel arm on the microswitch to cure it. BUT my V4S is different, the microswitch...
All these units look the same - (Same Chinese factory?) They seem to be about 850 grams in weight and the Garmin XT is 262 grams (according to...
I have no issues with the V4S rear brake, it could be that the bike has sat around for a while and the rear calliper pistons have seized? I would...
I normally don't like engine guards as they look like scaffolding but these do look good and are much more discrete, good find! One other question...
Look at Sykik, have been using them for a while now and they are very good, SRTP300 Mounted Tire Pressure Monitor – SYKIK Only small issue is...
I had V1 and V2 of the plastic mounts break (eventually) and finally replaced with the metal brackets - since then no issues at all, all done FoC...
Look at the link below Multistrada V4 Ducati Listed all the models, V4, V4S, V4S Sport, V4S Grand Tour, V4 Rally, V4 Pikes Peak and V4RS....
Quick Update – Bike is a 2021 V4S now with 21K miles. Last time out it got very dirty and had a full clean (no jet wash) and then sat in the...