I got a Brembo kit to rebuild mine about 6 years ago from a KTM dealer was told the sell them and they did. Was told also ducati didn’t sell them as of a lawsuit in USA but unsure if that’s true hope it helps
I bought an Aprilia one on eBay, used, and changed the reservoir over, all fine now .. Thanks for all the help !
I've tried multiple KTM dealers, but none of them are any help. Does anyone know a Model bike that is compatible or a part number?
In this thread are 2 options ones a brembo stockist the other gives you a KTM part number. post#10 and post #14 https://www.ducatiforum.co.uk/threads/999-brake-master-cylinder-kit.74814/
There are no kits as they were never made, deliberately apparently. You have to get a used or new (very expensive) complete one . Thread 3 You can only change the reservoir..
I sent a message to the ducati place. But the KTM part number is just the dust cap, I'm looking for the internals. Thanks tho
Yeah, that's the same thing I seem to be finding. I saw a few people said they got a KTM rebuild kit, but noone ever posted the Make/Model or P/N. I'm wondering if it was just the dust boot. I'm going to try n find a hydraulic seal company n see if they can match anything up. I'll post info if I can find anything.
I tried the seal company route, and nothing . Eventually a breakers and £ 250 ! they are becoming very rare !
I looked inti this a short while ago as I was going to rebuild the Brake and Clutch M/Cs on my 999 whilst I was rebuilding it, but the lack of a readily available kit has meant I am going to see how the brakes perform before trying a rebuild. If they do need rebuilding I was going to attack the problem from two directions. 1) send a sample seal off to one of my suppliers at work to see if they can match it. 2) I was going to buy one of these kits: https://www.kelgate.com/product-page/piston-seal-kit-18mm-master-cylinder. When it arrived I would check the dimensions of the piston in the kit compared to Brembo one and see how close they are. If possible I'd modify the seal groove in the Brembo piston to accept the seals in the kit, or make some new pistons in my lathe with the Brembo dimensions in every respect except the seal groove which I'd copy from the piston in the kit. Perhaps I'll order a kit anyway. Does anyone have a knackered 18mm M/C they've discarded that they would sell me very cheap to experiment on?
This is a good source for rebuild kits: https://www.stein-dinse.biz/advance...ords=brembo+repair+kit&x=0&y=0&categories_id=
Yep, and S-D are one of my go to suppliers for parts. Unlike many similar suppliers they are very responsive to emails, and when I asked a few months ago they confirmed they do not sell a rebuild kit for the 18mm Master cylinders, which is backed up by your link which doesn't appear to show one.