me too! i left it as it was as I felt I couldn't improve on it! I looked for ages to find some indicators that I liked… cheap ones were plastic, and any I did like were very expensive… So i used some of the cheap but very bright tiny ones that have the advantage they can be seen from the front, back and sides.
well it didn’t start first time unfortunately… I hooked up the software and it showed some error codes, but they could have been there from before so I cleared them. It immediately came up with a TPD fault code and after a bit of checking I had 2V instead of 5V on the live… I did struggle to find the fault… Then a mate came and he checked and the problem was I had transposed the wires on the CPS! The software is pretty good! we were able to remove the bank angle sensor and the muffler control valve in the software. After clearing the faults it started to a nice even tickover.
It doesn't look like your bike, it's not orange, who are you, and what have you done with Buzzer? ;-)
Don't worry, its all OK Well... apart from a final shake down and tighten, its finished. I am ahead of time this year as a lot of February will be taken up with a holiday. I will post a video of how it sounds once on the road. I really need to sell a couple of bikes now before I do another as I am at capacity in the garage!
Fantastic!! If you're going to sell any of them would you part with the Buell Cyclone custom and how much would it be?
Its probably going to be the Guzzi and one of the Ducati's that go... I will pop them on Ebay soon as I am back from holiday
