For Sale: Ducati 1098R 2008 £16000.00 Currently 9493 miles Owned by me since 24/9/2015 5120 miles 2 previous owners Both keys + Books/1098R Certificate/Commemorative Pack + ‘Toolkit’ MOT to April 2027 Bike located in Sussex Service History Overview during my ownership: Jan/Feb 2026 9473 miles Ohlins Fork Service (seals/oil) Brake fluid Steering head Bearings: removed/cleaned/re-greased Air Filter: cleaned/re-oiled DP Slipper Clutch: cleaned/de-glazed plates, cleaned/re-greased slipper balls/ramps Winter 2024/2025 9204 miles Replaced water pump impeller seal Replaced coolant Oil filter (OEM) + Oil (Putoline NTechPro R+ 10W-40). Gauze filter cleaned CCW/Exactfit TB1198 Timing Belts 2022/2023/2024: SORN 2020: SORN Dec 2018 8428 miles Starter Sprag Clutch replaced (Flange/clutch/gear/nut etc) April 2018 8144 miles Valve Clearance Inspection – none required adjustment. Timing Belts, Spark plugs, TPS re-set, Fuel Filter Oil filter (OEM) + Oil (Putoline NanoTech Fully Synthetic 10W-40). Feb 2017 6951 miles Oil filter (OEM) + Oil (Putoline NanoTech Fully Synthetic 10W-40). Gauze filter cleaned Bits: Bike is virtually standard apart from: DP Hugger and S/arm cover CF frame protectors, keyguard, dash surround (+ original), sprocket cover (+ original) DP neoprene seat (+ original) Renthal 14t front/38t rear sprocket + carrier + D.I.D. 525ZVMX Chain + case protector I have the original sprockets somewhere Termignoni 70mm full system with ‘Slash Cut’ cans + Ducati Race ECU + 1 dB killer (lost one last week on way back from MOT) Standard Exhaust system + ECU included but not installed Akrapovic Titanium Slip Ons + ECU included but not installed Pipercross air filter (+ original) JHP Q/A throttle assembly (I do not have original) TWM/BDS Billet Levers - same as DP (I do not have originals) Ducabike clutch basket (I have the original badly notched basket) JHP Billet Clutch Cover (+ original) HM quick shifter (original shift rod included) SAMCO blue coolant hoses (I do not have originals) HEL S/S brake hoses (+ originals) Renthal grips ( I do not have originals) R+G under fairing bobbins Shindengen MOSFET FH020AA Reg/Rec Radiator + oil cooler guards McGill High Performance Rod Ends (rear suspension linkage) (I have original rusty ones somewhere) Probably some other things that I have forgotten. I have a new rear Pirelli Supercorsa 190/60 which I haven’t got around to fitting. During the time I have had it I have done 9 Trackdays (all at Brands Hatch) without any “excursions” off track.
