Separate names with a comma.
Please can an owner of a 900SS/SL 94-97 please assist with a pic or two of the headlight gasket installation on the headlight assy, and around the...
Hi Guys, Possibly some thoughts and guidance wrt the FCR 41's and MOTION PRO throttle and cables. In my opinion I find the MOTION PRO throttle...
Good day, Any Ideas as to where the lug might connect on to? Many Thanks K[IMG] [ATTACH]
Good day, Is there a copper crush washer that should be inserted between the Brembo brake caliper and bleed nipple? Thank you!
Good Day gents, please may I ask for some assistance...:confused: Trying to reassemble the front wheel speedo drive adapter plate to the drive....
Can anyone please help with a pic of the underside of the battery box, particularly the mounting hardware for the starter relay bracket, and...
I'm about to install my FCR 41 Kit. The rear of the banked carb kit has 2 threaded intake adapters, are these thread- locked in, sealed in, or...
Am about to install the engine into the frame. I have 2x M10 allen head long bolts, the aft bolt threads into the frame. The forward bolt has a...
Anybody know who fabricates or can supply TPS kit for Keihin FCR41's racked installation? COSENTINO ENGINEERING used to fabricate a kit, however...
Good day, Please can someone confirm which of the 2 pickup coils go to the terminals as marked on the picture below: I have traced from wiring...
Get my FCR 41's tomorrow with dynacoil kit:D Those drawings that are supplied in the kit seem to be really CRAP:Arghh: Please if possible post...
Good day Gents, If I may please ask for guidance and assistance with clutch rebuild, new OEM components. The Haynes manual refers to the clutch...
Does anybody know if LT Snyder's Desmodue manual is available for purchase online as a PDF doc, or ebook? My search unsuccessful. To purchase...
Can the ENGINE GURUS please assist. Can this kit be dropped in AS IS into a 900SL, or must the domes be machined down to lower compression ratio?...
Any Ideas on how to replace the fuel cap surround flange to tank seal??? I bought a new seal as mine was perished, and had the tank resprayed....
Hi Guys, Can anybody possibly assist me with the : FastBikeGear's User Guide for Ignitech TCI-P4 pdf manual I cannot purchase from the online...
Tried fitting Pistons and barrels yesterday, managed to break the 1 oil ring. DAM [IMG] How do you go about doing this installation, the Haynes...
Any local vendors out there that can assist me with items below for a Ducati 900SL 1996 model: Nology ProFire Coil (PFC-06S 0.6 ohm) X2 Nology...
Hi Gents, Am considering the Keihin 41 FCR/ Exactfit Ignition coil upgrade fro CA CYCLEWORKS. Has anybody recently done this or a similar...
