Separate names with a comma.
On the mts1200 they have been too clever. The valve is still spring loaded open but you will get an ex vlv warning if the motor does not sense...
Glad you did Mark as I couldn't find it. Looks like some dremel action coming up for me now that I know exactly what I am trying to do! :smile:...
If anyone is planning to do the valve mod the best thread to explain it is this one but I have not yet done the course on linking threads so put...
I intend to remove mine completely and doesn't cost a dime - as did rivets - see below. Exhaust ValveTook a dremel to the spot welds that hold...
For a permanent cure have the valve disabled in the open position electronically (by CJS) or removed from the exhaust pipe. Lots of info on here...
Or just whip the screen off - only takes a minute then ride slowly over your favourite bumps that caused the noise. You will soon know if it was...
Hopefully you have found the cause. Alternatively it could have been that you drenched some of the electrics in your thorough wash and they have...
Sounds like the exhaust valve. It can fail without throwing up a warning. Check the cable is free to move easily. Switching the ignition on/off...
With a 15 tooth sprocket fewer than 8 teeth are in contact with the chain and doing the work; with a 14 tooth sprocket more like 7 so about 12%...
Surprised you found the bits. Your garage obviously cleaner and tidier than mine lol!
Pleased for you that all is now well. Hopefully some good weather round the corner so you can enjoy some good rides instead of having to strip...
Anyone want to make an offer for this before it goes on eBay?
I haven't noticed wobbly bars either. I will investigate next time I have the covers off. I would guess that any rubber is to reduce finger...
No, and sorry if I confused you by commenting on the 'knocking Ohlins' issue. Skyhooks are Sachs just to put the record straight.
No doubt you have Ohlins forks! This is a known problem that can be fixed by shimming. It is not a safety issue but can be done (free in...
For the RPM increase you can use maths. You have reduced the number of teeth by one fifteenth (can't write fractions on here). So RPM increase...
Ouch!!!!!
Welcome to the forum and congratulations on a great choice of bike. You will get a great deal of good advice hear.
Yes it is. I cringed to see/hear my bike hitting the limiter several times while being set up by CJS. But he refuses to do a 'part job' to less...
I would say that because they are so infectious Ducatis tend to be ridden much harder than most other bikes. How many people on here admit that...
