Separate names with a comma.
Ok just buy the GS :rolleyes:
Front and rear compression/rebound can be custom adjusted, front or rear , for each of the four riding modes. You must drill deep into the menu...
Not to be too nit picky but these tires are called Road 5 or R5, not PR5 or RP5
Probably nobody cares enough about your personal opinion to argue about it. maybe get a Pani and try and live up to your forum name
Sounds like these problems are more related to you rather than the bike
at 7500 miles rear sprocket should have lots of life left in it. Get a Ducati front sprocket and the DID (or whatever) chain.
Seriously though, the jumping screen is not the danger. Fiddling with it when you should be concentrating on the road is the danger. Forget the...
Dangerous?
The service note is just to be sure the cable loop just as it comes from the load sensor on the shift linkage does not rub on the cylindrical part...
The bike does not constantly look for the key when it's turned off. It only looks for the key when you turn it on from the handlebar or tank switch
The Ducati electronic suspension has had almost zero problems reported on this forum. It's reliability is not an issue. Almost all suspension...
A greased eccentric hub will never rotate when properly torqued. There's very little force being applied to it in this way
Why ask the question if you're not interested in the answer? Are you waiting for someone to say the service manual calls for grease so you can...
If you want a high performance sport tourer get the Multi, if you want a tractor get the Guzzi
Yeah so did I, never been happy with the way it fits. Got it for a 16 DVT, the small doesn't fit the 1260 front axle nut anyway.
If the pinch bolts are proper then the cracked axle nut is not going to have your front wheel falling off, but certainly a concern. The dual...
Seriously? People responding with oil recommendations? :confused:
This nut loosens the mirror from the ball mount but does not loosen pressure the ball mount itself. My RH mirror was almost impossible to move on...
and the high position front mount
Three screws from the inside. probably have to remove the engine :upyeah:
