Separate names with a comma.
My CNC 36/30mm Socket arrived today - Thanks to @steveb123 - looks good and is a good fit on the wheel nuts. Just to note the socket is quite deep...
The horn is in the beak and just the lower panel needs to come off (IIRC 2 screws). I fitted the Mini Denali on mine, and it was a straight swap...
There was more than enough water about today to wash any salt off the bike :) Impressed with the weather protection on the V4 kept me pretty dry,...
Normally heat expands metals - maybe the swing arm gets hot (it is right by the cat) and expands a fraction? But I would have thought that the...
No Idea how they got any extra grease into the bearing, all they said was they used a high-pressure grease tool to squeeze more grease in and then...
Update – The bike (V4S currently at 11K+ miles) has been to the dealers and the rear wheel bearings are all good. The three bearings in the rear...
An Optimate 4 would be cheaper than the Ducati option and hard wire a short lead / outlet direct to the battery.
This is the heating element from the rider seat. https://photos.app.goo.gl/jShYqrKXrkAz52pS6 The power connector is at the back of the rider seat...
Tha standard seat is not very comfortable, you are pushed forward into the tank. I then got the Ducati heated "comfort" seat, better but after a...
This may be an option for some extra noise ? Bicycle Exhaust Noise Maker (odditymall.com) :)
I will stick with the OE can and cat, it makes a good noise at tick over and that is the only time I hear it. Wait until it's really run in (about...
Not sure that you can get much grease into that small indentation, when i cleaned mine out I smeared some Silkolene Pro RG2 grease around the...
Correct - Lip side out that was the way mine was at least !
Never use a Jet Wash on this bike or any other :) Spoken with my dealer and new rear bearings and spacers etc. will be ordered and fitted under...
Bike is a V4S with 11K Miles on the clock. I had the rear wheel out today so that a new Road 6 could be fitted so was a good time to check the...
Firstly, I don't mind a dirty bike :) mine needs a clean after a wet weekend ride. The question is what colour is your rear sprocket because mine...
Agree with all that has been said by Captain. The V4S is the best sorted Multi so far for me and I came from a 1260 with a 17" front, for UK crap...
1st Service was £260, most of that is the cost of the oil!
I fitted my Pyramid extender to the OEM mudguard with the sticky pads and pins, 11k miles and it's still there doing what it should, keeps the...
