Separate names with a comma.
The Airmaster Tiger 8/44 will do just fine for tyres and a duster gun and the like. brian.
Think the byelaws do or aviation act exist as the airport at Newcastle would move people on from a public road which had a bit of a laybye/waste...
Have a look on your Cutch issue thread ,shows a photo of the bleed nipple inside the res. brian.
1 Set of 4 off 1998 showa forks sbk. all brass inserts solid in plastic and threads clean.:smile: brian. [ATTACH]
When you removed & fitted the starter cable to the starter post did the post terminal in the starter body turn at all ? brian.
This is the Ducati screw. 4mm Allen key. It`s the same thread as a disc bolt. brian. [ATTACH] [ATTACH] [ATTACH]
Photo of location. brian. [ATTACH]
The end silencer pipe to the silencer from the link pipe will be 45mm the collar will be 47mm outside dia that fits inside the 47mm inside dia/...
If you want to fit 50mm end silencers i think you require a 45mm to 50mm link pipe. as by what you describe you have a complete 45mm system. I...
Is the stem nut not a version to take the ball mount for sat-nav etc, as it looks like it has threads in the centre. brian.
35mm x 70mm brian.
916sps above the information table is H1 not to clear in the photo. The top line is 10 0154319 then 40 0154321...
You can use DOT 5.1 with DOT 4 ETC but DOT 5 is a diffrent type of fluid spec. brian.[/COLOR]
Clutch plate bearing in the pressure plate check it for stiff/notchyness if any replace. brian.
See if link works For Sale 998R For Sale brian.
Have a look on Ducati up north some one has a 998R For sale could be what you are looking for ?, sale has nowt to do with me. brian.
If you use heat be very careful as titanium will BLUE/GOLD if you use to much on it, i use 600 THEN 1200 grade wet/dry paper with solvol to get...
That looks like it could be the shim from the rear of the starter-sprag-flywheel etc the flywheel nut could be the problem. Take the left engine...
Post Number 12 who did the service and poor starting and running ? brian.
The brake rotors are they the old cast iron type ? the pads might not be suitable for them. brian.
