Separate names with a comma.
Have you tested the compression?
Nutmeg
If you look on Ebay for 'black neoprene foam 25mm thick' you can find something that looks like the correct material.
I converted mine to screw fixing to allow me to install a USB point and clock.[ATTACH]
In this photo you can see what look like the heads on the retaining bolts. These are dummy bolt heads molded into the plastic....
On my bike that trim panel is held in place with a pair of push on fasteners. There are two plastic pegs that project from the rear and pass...
It's missing the rubber headlight seal as well.
I've still got mine.
I have one right hand silencer for a 900ss, its the lower one in the photo. I bought it thinking it would fit a 600 but it does not. [ATTACH]
If it's written off by the insurer it will be recorded.
Is that size for the sump plug? The oil strainer cover size is shown here as 30x23.2x2 https://www.corsasbk.com/product/78710091a/
If you could that would be very helpful.
What size crush washers will I need to replace if I change the oil filter and clean the gauze strainer?
[ATTACH]
473100
Can you use a hoist to lift it straight up towards the roof? [ATTACH]
Check the pic l posted above. If you look at the way the light reflects off the two frame tubes in front of and behind the vertical cylinder you...
With a name like Coda l though you might be an Italian.
Thanks for this. I think your bolt might be this one...
I have already tried it with a screw extractor and I can feel the extractor is at the limit of what it can take and no movement from the bolt. I...
