Separate names with a comma.
Well as you can see it took me a very long time! I have just completed another batch of replic Brembo full floating brake carriers. I said I was...
We requested compensation from MotoWheels for paying the customers insurance excess for the other damage done to the bike when the ride height rod...
RickyX thanks for your input into this and pointing me at Eulers equation in the first place. What about in the situation where the centre of the...
RickyX thanks for that, I note however that you missed 'n' out of your simplified equation. F = n π2 E I / L2 (1) where n = factor accounting...
Thanks for all the good input. I am now coming to the same opinion and many of the safety critical products we supply have TUV, DOT...
Good question. No evidence of any external sideways load. No marks on the rods or rod ends other than wear the outer radius of the bend came into...
Be careful here's a pic of an aftermarket ride height rod made by motowheels/Corse Dynamics that failed shortly after being fitted on a Ducati ST....
Just a bit of a cautionary warning. We recently had an aftermarket ride height rod fail on one or our cutomers bikes. Picture attached. Product...
We supply our 30+ page manual for free when you buy the units from us (and free phone support and setup assistance for our customers) and of...
For the past few years we have given our unofficial Ignitech manual away for free to literally hundreds of Ignitech's customers and received...
For your fairly standard engine just use the standard Ignitech Ducati Map as your starting point. If you had high compression pistons or other...
Just email [email protected] and I will send you a PayPal invoice and a copy.
I wasn't going to make any more carriers for the cast iron rotors, but one of the forum members has insisted to the point of sending me some money...
Some brake pad observations for those of us with cast iron discs. I have just taken out a set of SBS dual carbon pads and they won't be going...
Many thanks, we have just three sets left from the last batch now. I don't think we will be doing another batch as have too many new projects...
I just picked up our last batch of these carriers from the anodisers today. They look fantastic! See pic below. If you want a set EMAIL me your...
Just to advise that we will have more of these in stock next week. Currently at the anodisers. If anyone wants a set please just email...
Word has it that it is actually heavier, but perhaps more consistent feeling between left and right hand corners, but I bet the real reason was to...
Sorry NGR make nothing for the wet clutches. Here is a pic their Ducati dry clutch hub. It's 1 pound of butter lighter than the standard hub....
Steve, I stand corrected and better educated! Many thanks, Liam
