Separate names with a comma.
i did the valve adjustment, installed the belts (all three marks lined up), now it's time for ignition timing, since i took of the pickup plate to...
Well after a lot of work, mainly sanding shims, checking and re-checking. the job is finally done and the heads are back on the engine after good...
Yes Shon is a good friend, he is the one i was referring too.
one of my friends is working on a darmah, another one is bringing back to life his old Indiana. my pantha has been seating at someone's garage for...
even without the rocker and washers, just the pin itself it gets really hard to push it into the closed end hole, i need to use a plastic mallet...
so today i lapped the valves and started assembly and adjustment, first i did the vertical head inlet, it went ok, had to sound down both closer...
i ordered this tool set today, i hate doing a job without the proper tools (the down side is that ill have to wait until it gets here) so your...
so i measured and took apart the shims on the vertical head, both openers were at 0.20mm so way off, and the closers would not move at all no...
Rick, Thanks for this very detailed explenation, i think this is the best write up ive seen on this subject! I'm able to pull out the pins with a...
Thanks! How to measure the closer gap when the rocker is removed?:thinkingface:
While having the heads of the bike i thought it's a good idea to adjust the valve (and replace the stem seals) I watch some videos on YouTube and...
Good fix, i think i'll have to do the same as the new switch i have looks the same
Sure, this is what im doing
Well, the project is slowly moving along, due to my geographic location and covid-19, it's a long time for parts to get here. i found an NOS...
So wheels are back from powder coating, i installed new bearings and mounted them back on the bike the package from stein-dinze haven't arrive yet...
well, the guys over at the Pantah FB group said the new plate i have wont work as it's a koko san unit and needs a different stator too, not...
So i was lucky and got a new pickup plate from a friend, it looks a bit different although it fit at the same location and seems to be aligned the...
Thanks for the detailed description and pictures, i will need to do the same
Glad my pic helped, yes the motoplat thing was not there, and as i learned (mostly from this forum) it's totally useless POS. so i have no...
Regarding the ignition plate, thanks to a member of the Pantah Facebook group, i got some reference pictures and was able to put everything back...
