Separate names with a comma.
[ATTACH] [ATTACH] Fitting the fairing is coming along, I’ve cut around the radiator and trimmed so it clears the radiator hoses too. More...
[ATTACH] [ATTACH]
Ok, it’s been a while! The GPZ was still messing about, only running on 2 cylinders. An awful lot of investigation (and £80 in parts that didn’t...
I a moment of distraction I decided to investigate why my 1985 GPZ600R didn’t like running when it got hot. I stripped and refurbished most of...
That’s the other parts of the fairing attached securely using fibreglass on the inside and epoxied blocks into small pockets on the outside....
Some more progress, the fairings and supports have arrived! The seat support won’t work as is because I don’t want to cut the frame and will be...
One thing I did notice was the clutch now won’t pull in, as I’m changing the line to braided hose (to match the brakes) I’ve swapped it all over...
Irritatingly work keeps getting in the way! Lower engine now painted, finally got the engine case and front mudguard back from the painters so...
Bugger! Cheers for the info.
I’m building a kinda cafe thing out of a crashed ST2 with a sport classic style front fairing. I’ll be using a 998R style race seat unit as I...
Well that’s the battery wiring modified to go under the seat and the loom re-wrapped. I decided to refit the throttle bodies and air box now that...
On the upside I ordered all the new fairings and supports last night. They’re the penultimate big bill before paint. I’ll cut out the big wiring...
I bloody hate wiring. [ATTACH]
Now working my way through the wiring, as my battery will live under the seat rather than in the usual location I’ve extended the cables to the...
I'd price up a complete engine and gearbox from a working bike, compare the cost to how much you would loose by selling as spares or repair then...
Yeah, it's a little brighter than the Ducati silver, but as the whole thing is getting done it won't make any difference. It's also loads better...
[ATTACH] [ATTACH] [ATTACH] This was after jetwashing off all of the loose crap and paint, but before really going for it with the dremel and...
Of the engine?
With the engine back in I've got access to the sump and bottom of the front cylinder for paint, but it's currently -5 (which is just too cold for...
The POR15 is brush on, I used the small sanding drum on the dremel for most of the corrosion removal as well as a vareity of small files and a...