Separate names with a comma.
All sorted. Running like a dream !!!! Was in the wrong way . Thank you everyone for the help... great forum..
Ar I removed the throttle as the clip on was snapped. I put it back together but presumed it would only go back together one way?
Not changed any plug connectors since crash or anything around that area only the clock. The wiring diagram has 2 gnd wires out of the clock i...
I'll go back n check earths again
When I put my finger on the butterfly they are both vibrating a bit and both make a buzzing sound like they are unsettled
Both identical movements and both open the same amount when using the throttle
Mine doesn't but I think it used too
[ATTACH] [ATTACH] First pic is ignition on, ever so slightly opening butterfly. Second pic is ignition off, butterfly fully closed. Full throttle...
Good call! Right I found 3 of the 21 wires in the dash hadn't quite gone in far enough. Pushed them fully in. The dash now works with no errors...
Mine has a race lithium one and I've charged it for a couple of days and it says it's fully charged? I'll double check the rest of the loom...
[MEDIA] My dash is doing exactly this but mine won't start it just clicks the starter as if battery was flat but it definitely isn't.
Yes front end one. Smashed the clocks . Had to rewire the clock. Didn't check the rest of the loom though. Will look tonight. Any earth points to...
Ok thanks
Rebuilt the bike after a crash and bike won't start and the clock is all flashing with no figures in the relevant boxes etc A panigale expert...
will titanium bolts be ok for disc bolts ? Read somewhere they need to be steel for a sensor to work? Maybe abs or something....
How did this get sorted. Mine is the same
[ATTACH] I[ATTACH]
Everything seamed to go ok but got flashing indicator lights and rev counter .
Yes got plug n pins from bikesport developments. Should be ok now I have the colours..
Spot on. Just what I needed .
