Separate names with a comma.
For what it's worth, despite a closed question, here's my effort which I fab'd up and is reasonably effective Aly tray made from 1mm sheet from...
Interesting. Should have tried pulling the clutch in and seeing what the change in sound was. Suggest you make a new video !!
[ATTACH] [ATTACH] [ATTACH] Welcome Helen. Great bike. I too had problems with the stock mirrors on my 1098 so have fitted Oberon Mirror Extenders....
Ok. Thanks Symon.
Would you happen to have the headlamp bulb covers off the back of the headlamp unit going please Symon ? After a pair to do an LED conversion....
The Gates Carbon Drive app isn't bad but I prefer the belt tension feature of JPDiag using a USB microphone. Seems to provide more consistent...
Mount the valve stem in a drill, spin it up and take sand paper then wire wool to the face as it's spinning, making sure not to contact the valve...
If you're that worried, disconnect the oil feed hose to the oil cooler, rig up a funnel inserted into the hose held and lashed vertically and pour...
Use JPDiag every time on my 2007 1098S to reset the service light when performing self servicing. Also use it to balance the Throttle Position...
Following on from my suggestions at post 24, you should be able to check that the starter is or is not receiving 12v at its positive post by...
Like Sam1199, I reckon it's something simple like the side stand switch or kill switch. You mentioned playing around with the stand, and I see...
Blimey. That is a bit nice. Fab bike. Well done pal.
That's proper tasty. Welcome pal. R.
Think outcome was that as long as original beam pattern is maintained with proper cut offs then fitting HID or LED is now NOT an automatic MoT...
I've always reverse bled the clutch and had fab results. It pushes the air upwards to the master cyl and lever mounted bleed screw. Just need some...
4mm internal diameter should do it. Fish tank tubing works well. Or auto washer/wiper tubing. All available at B&Q. However, I use a reverse...
Glad to see my write up still of use rdryder ! My dash still looks like new after I did the screen repair. Yours still ok ?
Ah well. Thx for replying. R.
For the front dip and main headlamp bulbs that is. Thx.
Hi there. Good luck with the sales. You wouldn't by any chance have a pair of rear bulb covers would you please ? Thx. Rich.
