Separate names with a comma.
Replaced my slave cylinder with Oberon a year or so ago. The fitting was straightforward with no problems. It is better than the stock setup now...
We'll, if I plugged it into the wrong socket why was the flapper kept open after installation? I'm just reporting fact, not speculation.
My Duc ee caused problems. Everything was ok a month or so until I rode in high elevations. The idle became variable from 1k to 2k. When at...
The brass nut is what you turn. The rings indicate the amount of preload. So wind the brass nut clockwise til it stops. Mark common spot with...
Been running the smaller from sprocket for 17000 miles. No problem whatsoever and a nice and cheap mod.
The triumph USA tech said they tested flow of a kn filter. Said up to 500 miles it flowed more after a proper cleaning and oiling. After that he...
Pivot pegs are nice and wide. You can also use their insert if you don't like the metal serrated surface which makes it a wide but grippy surface....
Nice real world write up.
Our local Ducati shop says 7 hrs labor, $100 x 7 plus parts. It's going to tear up a $1000 bill. The parts are belts, shims, spark plugs, fluids....
Mines a late 2015 and no issues. They put on a new fuel gauge sender (I had no problems) and fixed a nut that fell off a pannier lock. 17000 miles...
Ok, let's all put our exhaust baffles, stock seats, tires, and muffs on because Ducati thought about it quite a bit before forum folk?
You can loosen the forks bolts and there's enough friction to keep the front end from crashing down. After loosening get behind handlebars and...
I've done it on several tall bikes and if within reason it's no problem. Also, if possible I lower the rear by the same amount. But I think 12 mm...
I've heard that but after 4 Ducatis with the same mod no problems for me. I certainly wouldn't go more than one tooth though on this bike. It does...
Cheaper to do one tooth less front sprocket and use same chain. Very nice mod.
I've done it on base model. Just use rags or some protection for rims as there isn't much clearance to pull off calipers. Didn't have to compress...
It should be able to open and close no key. But lock with key. (BMW).
More low end torque Lighter weight Bags open and close without key Built in rear rack Real self cancelling signals Move cat to muffler so it can...
Be careful tightening the oil plug. Either me or dealer stripped mine out. I used gray gasket sealant for screen. Put it on after draining and...
