Separate names with a comma.
I think it might be item 21 in this pic. [ATTACH]
I can't find it the parts list but it screws in to side of the engine and the other end fits into the grommet at the bottom of the battery tray.
Looks like corrosion in the terminal has caused resistance creating heat, melting the wire insulation and damaging the connector. 12 way Molex...
It depends on what kind of keys you have. Here are the instructions for the red and black keys. If you have these you could remove the transponder...
I'm fairly certain that it will.
I've had issues with the tendons of my left hand for a number of years. The best thing I did was to change to clutchless gear shifting. Changing...
I'm not sure why it was 3 terminals in the output connectors. I'd think the centre one is redundant. This shows the normal connections. [ATTACH]
I've no idea if a washer is used or if there is room for one under the nut but a Nordlock washer may be worth considering.
I don't stand and bend over. I crouch on one knee beside the bike and pull it towards me using the frame. I never found any difficulty with the...
I usually do this by putting the bike on the side stand, holding the front brake on with my right hand and pulling the bike towards me with my...
The cracked window is in the reservoir section so is out with the pressure system. It will have no effect on the operation. The odds are that...
I would think a regulator problem, allowing an AC ripple voltage to get through. This will seem to disappear at higher revs as the frequency...
And when measuring low resistance values you will often get inconsistent readings just because of the lead resistance and how well they make...
'Fraid not. I'm in NE Scotland.
Get a hold of Melcodiag. It will tell you if any of the sensors are faulty or giving erroneous readings. If the air sensor says -5° when the...
The throttle bodies don't have to come off. They are only shown of thew bike in the illustrations to highlight where the adjustments are made. The...
These might be what you are looking for Stainless flanged hex nuts
The amount of fuel injected is determined by the TPS opening and engine revs modified by the air temperature and coolant temperature sensors. Most...
The carby parts list gives part numbers for the right and left halves but the 900ie gives a part number for the pair only so can't compare...
There's also the Honda NC00XT and the Aprilia Mana and a few others but I'd rather stick with the Ducati I like and I'm used to.
