Separate names with a comma.
Bravo! [MEDIA]
Ran again for 5-10 mins and it didn't seem to be as bad. Un-cancelled the MOT, took it along and it passed. Felt really good to be out on it...
Hi all Sorry for the delayed update on this one So the bike is now starting and running fine - evenly at least - but I am getting lots of smoke...
So maybe there is still some residual "stuff" in the pipe(s) from before. Question is why does it appear to be, and smell like, oil. I will run...
I pulled the plugs and they look OK to me. They are new but even so, not oily. 7.4k miles on this bike. Valves seals sounds like an involved job.....
Just fired it up today, and actually it seems to be running and sounding spot on. Waited a few mins and the dripping started again, and it does...
Update on the above I pulled the carbs and replaced the float valve on the RHS and that seems to have cured the issue. I'm actually getting quite...
Thanks again. Quick update, I did remove the plugs and the engine turned over without any issues - fuel sprayed out of the front head. I upgraded...
Ok, from bad to worse.. Full charge on the battery, and now I get this: https://www.youtube.com/shorts/m16hT5Eg-YQ Swapped the battery out to a...
Thanks for all the replies Just to answer a few of the questions - Lead connections are all correct (cross checked against another running SS)...
Hi all I'm trying to diagnose why my 900ss seems to be running unevenly, like on one cylinder. Brief video here -...
Found another solution, spotted a bleeder screw cover which was lying around. Inverted that and it's a perfect fit! [ATTACH] [ATTACH]
I'm missing the rubber grommet into which the fuel tank prop would sit - any idea what the part number would be for this? I've searched on Stein...
Sorry for such a noddy question, but I want to replace the nuts which secure the inlet pipes from the carbs onto the cylinder heads. They look...
Tinkering again. Can anyone advise what this frame lug is for on the LHS? [ATTACH]
Hi all My 900 was running perfectly about a month ago (after resolving a previous issue caused by ICU leads round the wrong way). Now, once...
Hi all I've got some brake light problems which are now the only issues holding me back from putting the bike through an MOT and hopefully being...
Good Morning The petcock on my tank appears to need replacing; I've got if fully closed off atm while the carbs are out, but still getting some...
Thanks very much everyone for the help so far!
The efforts continued. I primed the slave, which already seemed to be full of fluid anyway, but this didn't make any difference. Finally, in...
