Separate names with a comma.
Don’t write the red part off. Someone with a lathe could help. An old ring spanner (or old socket) could be machined to fit and bonded in place to...
You may have to hammer some steel shims in between the red part and nut to give the nut something harder to be captive against as opposed to the...
Holding the red part?
Reverse of this? [MEDIA]
Should be plug and play according to this post https://www.ducatiforum.co.uk/threads/swapping-busted-ecu-for-2nd-hand-unit.99334/
Check out AliExpress for cheaper prices
Google AI [ATTACH] The XT60i is a modified version of the standard XT60 connector, featuring a higher current rating (100A vs 60A) and an...
Look at post #16 on the Ducati MS site. You need to find someone with a TMPro and then cut the dash as in the image to reveal the programming...
Not familiar with the dash. Does it come apart or is it sealed? Which immo chip does it use? This may be useful...
[MEDIA]
Following on from my research into the hexadecimal code held in the 848/1098/1198 dash I now believe that I have cracked the way the odometer...
I believe I have cracked the algorithm used in the checksum calculation. Please feel free to test the attached calculator. Change the file name...
You can still use the crocodile clips with the Optimate connector. Identify the +12v output and connect the red crocodile clip to it. Do not use...
I built a diagnostic port extender using 2 core cable and a male/female Superseal connector. The blanking cap was fitted to the extension.I also...
Unable to do this.
So 5+F+0+1(Dec 5+15+0+1=21) and B+c (Dec 11+12=23)
Just been playing with your calculations Hex 5F = Dec 95 Hex BC = Dec 188 5F + 01 = 60 (Dec 96)
This looks promising. Tried 1’s compliment with binary values, Modulo256, CRC-8 and CRC-16 all will failure. I have PM’d you another chip dump to...
This subject has been well covered on the forum For example https://www.ducatiforum.co.uk/threads/free-diagnostic-software.14914/ The best source...
Diagnostic port
