Separate names with a comma.
Don't use VHT paint. It won't get hot enough to cure and will just rub off when cleaning. Advice based on experience.
Ah, thanks for explaining that Got a better idea of how it all works now. Or should.
Which part of the air seperator could you see the fuel coming out? (I've been wondering what that thing was - should've looked in the parts...
Thanks Birdie. I see polymax list 2 almost identical o-rings, one for 87p and one ending in 'FDA' for £5.27. Do you know the difference? I was...
Thanks for the quick reply fellas. Much appreciated Guess I'll have to face the music and pull the fuel pump assembly out. Think I better order at...
I've got a misfire/stutter that I thought might be electrical but now I'm not so sure. When I look inside the filler with the engine running I can...
MotoGP needs Rossi, even a slightly slower Rossi, like Guy Martin needs a mug of tea. And here's Guy bragging about his new teapot.[ATTACH]
I'm not familiar with the grooved seals. When I had a leak on my old 900SS I cleaned the bore with fine wet & dry and replaced the knackered seal...
The master cylinder has a port which enables the fluid to move back into the reservoir to the point where there is no force on the pushrod. But...
No mention of the cause of push rod spin - a knackered thrust bearing in the clutch pressure plate. That needs to be at the top of the check list.
I say, I'm not discussing my elasticated trollies on a public forum. Again. Good point though. But no, I haven't changed them. I just turn 'em...
I haven't inspected the pipes/shells but will definitely do so now. Thanks for the tip Chris. Got me worried about my carbon cans now . The bike...
Now then, Tamburinios, my 996 seems to indicate a healthy temp most of the time - rarely above 180F (mid-scale), unless town riding, and often a...
Or £14/15 on ebay (e.g. item 160913702319 from thetoolacademy)
Take the spark plugs out to ease the load on the starter while you're testing (and switch off ignition). I replaced the starter brushes on my...
Worn elbow joints? Just making sure that all bases are covered.
I've had plenty of rides over the years which have left me feeling a bit mojo-less and pondering this daft motorcycling life...too much traffic,...
Tommy B, do you have a thermostat ?
Agreed. Best looking bike in the shop and worth every penny.
I use a peaty single malt, or a blend if it looks like rain.
