Separate names with a comma.
As you've always fancied one, I think you should aim for something close to an unmolested original (with the exception of 50mm carbon termis)....
Only if you're accelerating when you change. Hold your speed constant before you change. Physics squire.
I did this to mine. I cover each joint with clear heat shrink to make it obvious/remind myself that there are connectors under each one. Having...
It's just a coil around a magnet, with a grounded shield around the 2 wires to the coil (because it's a low-level analogue signal that needs...
It could be an active ground, i.e. pulled down by the ECU. There'd be a reason but can't think of one right now.
Sorry - ignore all that shite. Pin 16 is GND for those sensors. Duh.
Vinny, with the ECU unplugged, test for a short between pin 14 on the loom and ground. The ECU might be able to tolerate shorts and not be damaged...
Never understand why folk fit those stop-cocks to the forks. They're asking to be twiddled by a scallywag while you're in the cafe waiting for...
It took ages for the various pennies to drop for me....it was like playing on one of those slidey things in a feckin' arcade.
I break the rules. After I fit the horizontal, I make sure both cams of the vertical cylinder are rotated 135 degrees CCW from the marks, then I...
On the crank/piston, yes. On the cam, no.
But as Derek said, turning it back 90 degrees puts the vertical cylinder at TDC on its exhaust stroke, with the valves slightly open and the cam...
Correct, but obviously only the horizontal piston. The vertical will be half way down on its intake stroke. When the vertical piston is at TDC on...
[ATTACH] From my scruffy notes.
That doesn't make sense. If the drive and cam pullies have rotated 360 from the marks then the marks will be lined up again and the horizontal cyl...
Ripface, did you mean DucatiDiag, or is it TheDarkWraith's 1.6M tool you got working? I see some of those 'shorted' errors on the 1.6M tool when...
If you get it running but have no comms then you might have a missing ground link. The fix is described here:...
I've just tried the tools on a Win7 machine and got the 'stopped running' error. Then I nstalled the version of DirectX from here:...
Check out this thread for 1.6M diagnostics software:...
Hi Ripface, The 1.6M diagnostics tool developed by TheDarkWraith on ducati.ms can be downloaded here:...
