Separate names with a comma.
On my V4S the fuel light comes on at about 150-160 miles. Last year hooning about in in Scotland it came with no fuel stop for miles. I rode more...
Was it this topic? Pikes Peak Rosso Iv To Metzeler Roadtec 01
Annual service is normally a check over of the bike, Brakes, pads, etc, chain and sprockets wear / adjust, steering cables etc for any wear or...
Sorry to hear about the mishap, hope you mend quickly.
I talked to a Michelin rep at my dealers a few years ago and his recommendation for Road 5 tyres was 35 front and 36 rear for solo riding - an...
I was told that it was done so our friends across the pond could tell which was right and which was left. :joy:
The Sat Nav power lead is normally higher up than that but it may have been shortened. If not it could be the wire to the side stand switch, easy...
The bash plate? What did you hit a rock :eek:. I have a dropped a couple of Multi's over the years but never damaged the bash plate. Glad you and...
Yes the Carpuride is square and the hole centres are 30 x 30mm, that's not AMPS compatible hence I had to make up a mount.
I'd be interested to know if the L200 is really an AMPS hole pattern mount? The W702 says it is but it isn't! Its a Chinese RAM Mount - slightly...
I have just installed a Carpuride W702 onto my iconic mount on my V4S and can use MRA (with a selection of other maps as a "lifetime" MRA user)....
Totally agree - see below Ceramic Coating | Ducati Forum
I use the Iconic Mount - now with metal parts as the plastic ones broke - twice, service can be slow but the product is good. When mine broke I...
Re the front Brake I agree, there is a microswitch there, just a plunger type, but even if the switch is held in the closed / depressed position...
My guess is that it turns off the ACC when it is engaged.
I'll complicate this a bit more :) Bike switched on but not started. If I hold the rear brake microswitch up with a thin screwdriver, so it does...
As we all know the back end of the V4's can get very dirty very quickly on the wet and crappy UK roads. Recently I had given my V4S a proper clean...
I had this problem on my 1260 and ended up bending the spring steel arm on the microswitch to cure it. BUT my V4S is different, the microswitch...
All these units look the same - (Same Chinese factory?) They seem to be about 850 grams in weight and the Garmin XT is 262 grams (according to...
I have no issues with the V4S rear brake, it could be that the bike has sat around for a while and the rear calliper pistons have seized? I would...
