Separate names with a comma.
@nelly I go to the bottom of the top fine line using the FACOM tool, using button no.4, as you say between the cams. Luckily I can just get the...
Out of interest, if you use the FACOM DM.16 you can get it on the vertical, between the 2 cams but the horizontal, between the 2 cams the radiator...
What are you after? I bought an attachment kit to connect to my MOSFET R/R. Plugs straight into the wires from the...
Thanks for the info, I do indeed check yearly, I had some Exact belts on my old 749R, and don't think they hardly lost any tension at all, so used...
I always used the 5mm deflection as you say, then bought FACOM tension tool, then the TEXA TTC all brought on by paranoia. Never had any issues...
Just found the receipt...were listed as JHP Corse. They all look the bloody same same to me!
I too found a set on eBay, paid £120.00 if I remember. Was missing a bearing that sits in the gear changer pedal, but easily sourced for a few...
Replaced my belts. I have always replaced only using the 5mm allen key method/twist method and FACOM DM.16 tool. However, I used the TEXA TTC...
Definitely comes from inside/amplified from airtubes - Airbox area. As when you put your ear to intakes you can hear it. I do have a new Leo...
Does sound like resonance of some kind. I have BMC air filters and they are slid into their inserts and very snug. I did think it could be...
Stab in the dark. But, I have noticed a noise which comes from out of the air vents and is in rhythm with the engine ticking over. Its not that...
Very tasty, I know have Leo Vince on the sps. I do like a bit of Leo!
I just didn’t understand the idle issue, easily sorted. I swopped it for my RC8. I did keep the nose, mirrors, headlights & unit for a while and...
Seriously?...when I went to view the bike I thought it was strange he had it running just before I arrived, could feel the heat from the engine...
Runs very smooth. I put stack height a tad over the 36.5mm recommendation. Luckily only do minimal mileage on this bike and will refresh each...
You are right & I would, have considered P4 calipers...but need to start saving again. Also needs a good service, started it today and puff of...
748SPS, but with slab type fairings, still got all original parts
Two small LED DRL. Very bright and slightly pitched down as not to dazzle. They are attached on a carbon quick release removable plate on the...
[ATTACH]
[ATTACH] [ATTACH] [ATTACH] [ATTACH] Finally finished, minus mirrors. [ATTACH][ATTACH][ATTACH]
