Separate names with a comma.
Looking at your photo of the rear caliper pin, anti rattle plate, pads but you don't show the little E-clip to stop the pin from coming out, you...
Some photos of the ones i fitted , not liking the style of the black kit with clear lenses but liking the silver only kit i sprayed them with...
I have the 97054SAAA style which only came in silver , this was a four piece kit, the other was 97065B01A which was black clear lens, orange bulb...
The DP indicators came in silver only all four had the small block feet so the front two would fit the air intake tubes, plus they had orange...
It was only fitted to the 998FE model. brian.
You did check that it works before you put the outer case back on ?:smile:. brian.
If you have the rubber seal with the metal inserts remove the inserts from the seal and mount it with them and no rubber so you have a nice vent...
Look like Std Showa tin coated and powder coated black or anodized to me. :-) brian.
I would agree for the mileage covered back to M/rapido, but i would check the clutch hub nut is tight first if you intend on riding it back ? brian.
When you have it stripped down check the two faces the sprag works against the inner gear/flange and outer gear if you have any tram lines on the...
It sounds like you have a quick change set up by your question, so it would be the carrier. as in post 2 its the outer sleeve of the bush that...
Have a look on ducati upnorth in the tech section you will find a good guide to belt changing. This has the facom tool and shows which setting to...
Mirror mirror on the wall who has a ---- the one and all in the mirror on the wall. brian.
Have a look at snorkelbat shop on ebay it has a few types of plugs. brian.
------
What is the difference in the old and new springs length ? brian.
If you have a slipper clutch p/plate and fit a six in one cap plate it can lock the clutch up solid as the pockets for the springs are deeper in...
Have a look at wago(think that`s spelt right) connectors they are a bit like what you have but can be re-used. brian.
Looking at the vid, you have a black area in the core/matrix and the Smoke/Steam when you see it pass through the headlight beam has a blue tint...
The long bolt is 120mm from under the head. M10 X 1.25mm, The special is 85mm from under the head, M10 x 1.25mm. The other two are harder to find...
