Separate names with a comma.
If the air filters are standard ducati type they should be fitted dry, you say they are impregnated with oil this could be your puff of smoke when...
The Banjo bolt is M10 X 1mm thread, the nipple could be a M6 nipple or 1/4 UNF nipple. depends on which manufacturers banjo fitting you have....
If you changed the oil and the clutch started to slip after the oil change did you use the correct grade of oil ? brian.
Air filters have been cleaned and lubed, ? what air filters are you using. brian.
The part on the left is the top off the float sender, middle part the float, third part looks like the transponder chip that was put in the tank....
-3 is the most used size for brake lines, brian.
Yes. brian.
Yes you need the older type spring which hooks on to/in the part N0 14 in the first diagram. brian.
The Mirage formula had the motoplas kit on as i remember as the rear was dreadful to look at it came out just after the 1200TS Mirage which i...
If you have torx bits try tapping the best fit into the head with a hammer it might work. or drill the head off the M5 allen screw so the p/plate...
Nice Laverda with the motoplas kit great 3 cylinder motorcycle. brian.
The rev counter needle sweeping/twitchy indicates low power, could be a bad connection or low battery. brian.
The photo shows 14.2v at 3000rpm yours should be around the same give or take a little. brian. [ATTACH]
Check the bearing in the pressure plate any sign of stiffness or notchy feeling replace it with a new bearing. brian.
Have you dropped the bike on the brake lever side by any chance ? brian.
Rear brake torque arm ? brian.
How is the fuel filter secured in the tank ? brian.
If it has a ride height adjuster have a look at the rose joints one could be stiff or on its way to seizing up. brian.
The dia of the push rod and 10mm long. brian.
No, its just unscrew and fit new tops. brian
