Separate names with a comma.
While I was rooting around for something I found this air filter that I'd bought for the other bike, but never used so I'll use it for this one....
The simple answer is "no" ! & yes, they are slippery ! ;) However, having said that it has crossed my mind to maybe look at possibly using a pair...
Got a working gear lever now. There's just a temporary support fitted between the motor-plate & the carbon cover, which the gear lever shaft...
Got the primary drive cover cut out, mounting washers made & the footrest fitted today. Just the gear lever to do now, that needs some more...
The oil pump fittings, blanks, gauge & pressure switch are now installed. [ATTACH] I then removed the original carb support bracket as it gets...
I've re-positioned some of the engine oil pump fittings this morning to suit my oil hose routes & other things. Below is the engine as it came,...
Not sure if it's worth trying, but could another option be welding a nut on to the stud & getting a long spanner on it. You'd need to heat the...
Collected my engine yesterday from the dealer. Got in un-packed & up on my bench after a bit of struggling, it's heavy !! :astonished: [ATTACH]...
That's very kind of you, but it's not all me I have to say, there are some what I would call really talented craftsmen who've had a hand in this...
Got the steering damper mounting bracket finished off today, it's already for welding in position now. Also made a couple of positioning jigs, one...
Got a bit more machining done today. Got the spacer for the steering damper started, it's machined to size, but now needs a section cutting out to...
Tacked up the rear mudguard brackets today & drilled the mudguard for the rear two mounts. Holes are just M6 at the moment while I'm sorting out...
That bike does look well ! :upyeah:
Machined up six mounts for my rear mudguard today. I'd already had the sheet metal parts laser cut a few years ago when I was doing the same job...
Made the threaded spacer now & got it tacked into position on the lower yoke. Although it's only tacked in place I've drilled the hole deeper,...
Got a bit of fettling done tonight on the headstock cover. It needed some holes & slots cutting in it to allow removal without having to break...
I've just read through this thread from start to current finish & an excellent read it is too ! :upyeah: Well done that man, looking forward to...
The bike is ready for collection after having the rear mudguard, battery cover & headstock cover made. A few more jobs done, but that in turn...
What you buy will depend upon how much money you're prepared to spend & the space you have available. I have an Autec hydraulic ramp & an Abba...
I was going to go to the Stockport Motorcycle Show today, but the weather, once again, is shit !! So I did a bit on the Métis. The headlight...
