Separate names with a comma.
Well, there you go, sorted without delving in further
With the timing marks all lined up, it can't be 180 degrees out, unless I'm missing something. If the carbs have leaked previously, then the float...
Ricambi Weiss on mine. Not the best fit around the tailight, some people modify, I didnt. Very happy otherwise. Budget for painting, brackets, and...
Price reduced to £4000 ono
I take no offence, and wish to price it fairly. Having a look at the models that are out there, it's still a better example than most with the...
Not even a nibble...?
Those rings are for a bevel
I may possibly have a secondhand ring?
I had a low down 1/4 turn throttle fuelling issue, and after winter also a starvation at WOT, causing symptoms like a misfire. Never had the...
Here is my 2002 'Senna' half faired 900SS ie (rare) with just over 9000 kms which is about 5600 miles. I bought this bike in 2016 and, I'll be...
Stein Dinse is your friend Extremely helpful when checking parts. As per below for 1994 to 1997 900SS, no seal between caliper halves [ATTACH]
The gearbox output shaft washer on the sprocket side, come in 0.7, 0 8, 0.9, 1.0 and 1.2mm. You need to use a combination to achieve the results...
Get the bearing numbers and just buy SKF or similar
I've got one of these coolers for my 944
Keep us up to date. The rear cylinder seems to be the one that cause more issues with plugs, due to the heat/lack of effective cooling.
Yeah, I made a drift the exact size on the lathe. But I have used the threaded rod method too
The 2nu03EC are the ones are about 20 quid, The cage is fragile, I have had very little success removing them without damaging. When installing...
Gaz, great update, I've sat my cases on a bar heater to achieve the same end. Frozen the bearing slot in nicely. In answer to your question, I...
I basically machines an alloy drift with a perfect fit, for putting in all the bits. I really like your solution to getting the snap rings out,...
They are a pig, I made a tool for pressing in the bearings too, as they we tricky
