Separate names with a comma.
I saw that on facey-b. My calipers are proper 108mm, so that rules out all of the Ducati forks.
I had a new pair of forks with radial feet, but sold them only last week to a member on here. I will be getting a pair of ohlins r&t soon.
Cheers guys, kind words. Anyony, I have a single line going down to a tee piece on the bottom yoke, then splitting off to each caliper. Not sure...
The brake master cylinder was a bargain from ebay, as it was a bit wounded. I have experience of repairing them so striping it was no problem:-...
After sifting through the potato bucket account, I have found some of the images of some of the smaller details... Speed sensor for the dash....
So, to bring you all up to date, some pic whoring. [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG]
Then, in the summer of 2010, I bought another bike:- [IMG] There is alot more info on that here if you are interested:- Kanerdog1X1's Bike...
The rockers and cams are in perfect condition, so too are the valves. I did however leave the valves in the heads so that the new guides could be...
Cheers guys, I will get on with some more posts. Chris is doing the unshrouding work, the ports and inlet rubbers, and valve guides.
r&g, pain in the ass as the brake pedal is connected to the peg. move the pegs, and the brake pedal is nowhere near where it needs to be. gilles,...
I remember dropping the engine cases over the road at the powder coter, picking them up later that day and thinking they were brilliant! I was so...
Final instalment for this evening, photobucket is making me angry, so a little bit about the engine. The engine gave me two trackdays in 2009, the...
Starter motor had similar treatment, tho far simpler to accomplish. The nearest I have of a 'before' pic is this:- [IMG] The paint was stripped...
Throttle bodies. Rarely do they get any love, rarely are they even cleaned. Perhaps one or twice in their life the bleed screws could be mangled...
Cheers guys, I did indeed make the nut, or rather had it made as I only have a lathe, and would require a mill for the spanner flats. It turns out...
Cheers guys. Most of this will be familiar, but I need to document it somewhere. The fuel tank was slightly modified, partly for looks, equally...
Although the bodywork was in far from good condition, it fetched a fair bit on Ebay, so I could purchase some fiberglass. The first set was very...
Those of you who were on the ducatisti site may remember this bike. I have had her for what seems like forever, but the date stamp in the pic...
Glad you are happy with them Dave. :)
:)
