Separate names with a comma.
Just put 'which oil should I use?' in to the search box, click and then be prepared to spend the next few weeks reading argument and...
IMHO the No1 consideration would be to choose a bike that you have a genuine affection for. If you don't then the very real danger is that after...
Good job, well done mate :upyeah:
Personally I'd be more fussed about the viscosity than the fact that you're usin semi synth for low milages. I am in exactly the same situation...
Sounds like an internal break in one of the wires feeding the headlamp. The routing of the loom around the headstock must have caused it to be...
I'm restoring a 1959 175TS and get my spares from these guys. Both Nigel Lacey and Classic Ducati should be able sort you out: Lacey Ducati, Parts...
If a dealer diagnosed bore ovality before piston ring/bore damage without even stripping the engine, I wouldn't let them near the bike to repair...
Welcome home They're great bikes and you're right, the clutch slave leaking is a common issue across the ranges. A few quid buys the inner and...
To be honest mate, whether it was a stitch up or a genuine mistake, there's no way I'd be going back there again. What kind of company mixes up...
Why not give yourself piece of mind and just use some feeler gauges to check yourself? If you can do the belts then you should deffo be able to...
I have to say that I bought a small compressor several years ago and subsequently upgraded to a bigger 100 litre 3hp one and have never looked...
I'm pretty sure the solenoids in the newer Dukes are the same as they've always been e.g. round pot-type. In this case I did a bit of internet...
I agree with the guys above. Additional tip, heat is your friend with bearing removal and refitting. Use a heat gun (a hairdryer on it's hottest...
It's the clutch platesd grabbing suddenly
Main bearings went on my ST4 at 12k. Started making a hard to trace 'whiring' noise, that sounded like worn bearings, but seemed to occur all of a...
No worries, you'll find it a generally helpful and friendly community in here. If you've a problem or querie, the chances are that it's already...
:Facepalm: Consider the old can of worms duly opened :Facepalm: Just put 'what oil should I use' into the search box and be prepared to loose...
You will need to completely remove the camshaft to see the area which wears. It's only a few bolts and 20 mins of extra time to do so and it's...
That's pretty good going, most of the big twins use a bit of oil. That's nothing, don't worry about it. My ST4 used far more than that! Just ride...
I've got one of those Lomo bags too and used it on a similar camping trip to Italy, on my little M600. Highly recommend them! They swallow...
