Separate names with a comma.
The alternative route to 944 is to source a set of ST2 barrels and pistons and convert them from water cooled to oil cooled There is a YouTube...
If anyone is torquing up heads with this setup, it’s worth noting that if you set the extension at 90’ to the torque wrench the applied torque is...
Can you post a few pictures ? Red I presume Sounds like a good winter project
I fitted a replacement gasket from I think it was Athena, this allowed me to retain the original end float on the crank and gear trains, also they...
Hi I also had slivers of ally on the filter strainer on some but not all oil changes, on my 93 900ss, so a couple of years ago i decided to...
I’ve been using the Suzuki GS/GSX range friction plates for some time now as they are usually easier to obtain and considerably cheaper and as far...
Their only original once and as they age it’s more important to maintain originality than to pander to current styles
On my 900ss its the default settings of eyes wide open, brain on full alert and smiles all around
Sounds like the battery is not in the best of health, you should be showing 12-12.5 volts on a healthy fully charged one Probably a good idea to...
As others have said you’d be very unlikely to recover your outlay in money but that said they are interesting and engaging to work on and will...
I see that your frame has been overplated at the headstock, did you get this done because of the frame cracking or to prevent it, looks like a...
I’ve been using the worn friction plate mod for a few years now and have had no problems and a much reduced ware rate on the basket, nice and...
Don’t forget to unbolt the rear shock !!!
Hi Tony Easiest way to get engine out is to remove full exhaust or just end cans, tank, air box and associated wiring, support the swinging arm...
Hi Tony Sorry but I don’t know where you can get a frame brace, but when I repaired mine (must be over 10 years ago now) I got it from a member...
Hi Tony This will make you a really nice bike and you’ll find these are really easy but engaging bikes to both ride and work on My 93 build 900ss...
Been following your post on this, and if you’re removing the carbs to adjust the float heights it might be worth you checking this filter that’s...
I would be very interested in how this works out, the TT1/2 in my opinion will make a great though uncomfortable road bike, I’m presuming it’s...
