Separate names with a comma.
That’s good that you’ve got an alternative ride, I’ve had my 900ss for the last 20 years and winter icing has ALWAYS been a problem, but as both...
Reading your recent problems, carb icing does seem to be a probability , my experience with icing is that any temperature of 7 degrees or less can...
[ATTACH] Had this one since it was a Vespa [ATTACH]
[ATTACH] [ATTACH] [ATTACH]
The fuel feed line from the filter within the tank has been known to split with the fuel just recirculating inside the tank , robbing you of fuel...
Maybe the tank breather is blocked, try cracking open the filler when it starts spluttering Also check out the fuel feed and return pipelines...
That looks really nice, it’s absolutely spotless and very standard looking, just as they should be. The engine must of been out for painting at...
That work is absolutely fantastic, and should much stronger than the original design. Thanks for sharing this. If I’m not being to nosy what was...
Hi Reading your post fuel starvation seems the most likely cause of your problem, not saying it isn’t ignition though. Check your flexible fuel...
The electrical circuit was only just adequate when it was new so it’s probably a good idea to get some contact cleaner and a toothbrush and clean...
Hi The regulator rectifier is a bit of an Achilles heel on these bikes and will turn your bike into a barbecue if you ignore a flickering charge...
Italy? Bear With Me. !!!!! That’s going to seriously upset the bikes handling with a bear on the pillion Enjoy your ride out, it’s many years...
Had carb icing on my 900ss a few times, it seems to usually be when it’s below 7-9 degrees and the air is heavy with moisture. Think clear crisp...
Hi Zuff Just seen this thread There’s a couple of really small filters fitted on the fuel lines, one in the original Y piece joint and one at the...
Been a member for a few years now but as I don’t really post much I seem to be reset as a new member The SS is probably a recent acquisition as...
Hi Mine was a 900 and removal of the primary gear was done so I could strip everything out and clean up the cases properly prior to paint. You...
Hi, just done the some work on my 900ss engine, and your plug is definitely backing out. If you can get a small screwdriver or similar onto the...
Cold slightly damp air gives a noticeable power boost, it’s all down to the density of the air, the low temperature means more oxygen in a given...
Might be worthwhile checking the emulsion tubes as they will go oval with use and give you all sorts of running issues The keyster kits are really...
Hi all Although I’ve used this site before it was a long time ago so I seem to be loading as a new member So hello all
