Separate names with a comma.
Hi Nelson what's up ? Steve
Hi l have taken up the supply and manufacture ofDarren's case savers Having some issues identifying some of them can any past customers help See...
Hi Nelson Glad you are progressing well I don't know about the later models my knowledge ends after the desmoquattro series re ktm sprag...
Hooo-ray:biggrin::upyeah:
check the general relay lefthandside next to flasher relay symptoms tally Steve
good call rattle/clatters are brill you wont need all the holders at the worst put it it gear it will undo most time l have gotten them undone...
no problem with eating horse they prob should have told us first tho
nice tool l have a rattle gun that tops out at 180ft/lb just wound it up until it wouldnt go anymore been ok for couple o years now Steve ps...
six sided deep socket an impact socket is preferable you doing it with a breaker bar or an impact gun?
looking to do high level link pipes soon and sbk fork conversion parts Steve
the alloy subframe is on my 888 Steve
if l had orders for 10 l rckon l could get the price down maybe £150 -£170 Steve
Nelson take the small cover in centre of the aternator off make a plate up with 3 holes in it thread two bolts in the m6 holes and use a long...
Hi mate not built a carby one yet but the 888 front are looking to be around £200 -£250 lots of lasercut brackets and welding involved but of...
Hi its me l am making alloy subframes for 851/888s front and rear and some other parts from Titanium and stainless can rivet straps and exhaust...
You don't have to do anything to clutch Equal and oposite reactions was it newton? Having done this several times now would not mess about with...
Hi Nelson you can use the slave to help ease off the cover and pull with a bolt in one of the treaded holes IN use the impact gun to put the nut...
Hi Nelson use three bond on the case make your own case puller -three bolts and a strip of steel Clutch holder not needed -borrow a rattle gun...
You can shorten the spring around the bearing to give it a bit more life but might as well replace while in there Use a KTM part same but cheaper...
Hi Nelson could be the spag on the way out Low battery voltage tends to kill them Have you changed earth lead they will help starting Steve
