Separate names with a comma.
We use something similar to this at work (plastic welder) with the nozzle on you can control what it warms up. If you warm the end of the...
If it's plastic maybe warm it up with a hairdrier first to make it more pliable before you attempt to remove it?.
As Old Rider said you could be accidentally pushing up on the lever forcing it into neutral or the first gear dogs and selector fork could have...
Chuck half a cup full of coolant on your garage floor and take a picture..
If you can try and fully engage second gear before giving it beans and I then pops out under load it will be a dog/ fork issue. 1st to second is...
2nd gear dog wear is quite common as people stet off "spiritedly" in first then hammer it into second (regardless if the gearbox is ready or not)....
Look on your original ECU for the "HW" number, it has to be the same.
One of the lads who comes into work had been building his Lambretta for 3 years, it was a complete one off, custom engine/ frame/ exhaust etc....
Ouch!
One of our customers had similar, they took the window out of the garage but must have been disturbed. He noticed a widow propped up against next...
I've never seen a stop on any eccentric hub I've worked on. If it is the caliper mounts hitting the swingarm all you can do is either shorten the...
We use Motul Motorcool Expert, never seen any evidence of corrosion on bikes filled with it.
Do it at a proper track and pay for extra time if possible. I did one on a coned airfield and would have prefered a proper track. What cars are...
300v is one of the best oils you can buy imho.
Best bet is having the stored codes read from the ECU.. Can you ride through the 8000 rpm wall at half throttle?.
I would say you want a minimum 3mm pressure plate release/ movement. Maybe try the original slave cylinder on for testing.
Soapy water on first then decal then a squeegee (sp?).
Does the engine oil smell like burnt brakes?, 30 mile round trip with a slipping clutch is going to cause some issues. Do you know any decent...
Not for the pressure but for the chance of having metalic debris inside it..
Sounds like somethings gone wrong with the plates or pressure plate if you can sit there revving it but not moving in gear?. If it was air in the...
