Separate names with a comma.
Thanks. I'll have a go.
I used a micrometer to measure them and many are now thinner than the recommended 2.3mm minimum. Total stack height is now 36.5mm instead of 38mm....
Yeah, but my plates are very, very thin. :)
Just looked at my clutch plates on my 916SP engine (now a 955) and they look very worn. It is a slipper and has the 8 2.5mm plate setup. Any...
I fitted mine myself. It was dead easy but took two people. The door (garador, same as Hormann Rollmatic) came with very good instructions. BTW,...
I'll be after some Ohlins forks coming up to replace my standard, VGC Showa forks. If you want to sell your Ohlins and need to source some...
I have nothing against speed limits and enforcement. I admit I typically drive faster than speed limits (which were decided back in the 1940s and...
Just saw this on Craigslist while over on holiday. Pricey but looks like an interesting track bike for someone to import. Very comprehensive write...
I thought using bleach was a bad idea? Bleach, basically sodium hypochlorite, releases chlorine gas and that is highly corrosive, even to...
Hi Ed. Thanks for letting me know about your 916 forks. Can you send pictures please, especially of any marks on them? Also how much you want for...
Normal alloy Termis look like this. Do your outlet pipes have a less pronounced angle on them? Looks like it in the picture. [IMG] [IMG]
Well the end caps are riveted on, and they have the Termignoni stickers on them :). Not sure about the two rivets on the side though, haven't seen...
Don't look like it, Termis are riveted at the end. Do you have side profile pictures of them?
Yes, for £3,500.00.
I use Moto Rapido for parts. Excellent, friendly service.
I could play devil's advocate and suggest changing the oil before and also a drain afterwards. Before as it would be good to have fresh oil when...
I just found this using Google....so it must be accurate :grinning: (I would have used a better emoji but there aren't any available on this forum...
As you seem to have access to Falloon's book can you look up the differences between a '97 and '98 SPS for me? Specifically if they include the...
I was lent a near new SPS years ago, it was a '98 with the titanium con rods, AFAIK the only year with them(?). It had all the carbon in my list...
[IMG]
