Separate names with a comma.
Thanks for the feedback guys, I now know I need the correct brass 'screw' to hold down the jet block and not just any old thing with the same...
Here are a couple more pics of the hollow brass 'bolt' in question, (one of mine snapped which is why I'm interested in it). [ATTACH] [ATTACH]
Thanks for the repiles, and apologies because I made a mistake right from the off, in my first photo it's the thing beneath the 'choke jet'...
Thanks very much, great stuff.
I'm doing a full stripdown and clean of my standard 900SS Mikuni carbs, (BDST 38 - B67). All is now cleanish but O rings etc were knackered or...
Bloody cheap, the joy of Lidl & Aldi! So is it black rather than dark grey as it looks in the photo? It was a spray can presumably - did you prime...
Thanks for the info 'Exige': but just to finish off what I wrote, pls see this attachment (£120!) [ATTACH]
I reckon it looks great - you've also given me an idea for renovating my own. What type of paint did you use for the dark grey? Cheers
I used an "Odyssey" Extreme motorbike battery on my 900SS, gives a bit more cranking power but fairly pricey. Spec is great and last longer...
Brilliant advice, thanks. Sadly I'm stuck with the old type of rod for now (I just bought one new from Ducati!) and the old style of slave too but...
Thanks for that, also the tip about the oil seal. I got the bearing out by breaking the inner cage, removing that, then attacking the remaining...
The push rod normal actuation is longitudinal, the needle rollers in the bearing when fitted have an orientation which is longitudinal .i.e if the...
Thanks for the reply, but no the rod isn't the same each end. Actually it's not the bearing in the pressure plate I'm talking about (which I'm...
Can't see any post from Denzil about this - lots of other interesting stuff but I couldn't find this 'loose' needle bearing/clutch rod issue that...
I'm surprised no-one has had this issue before because many people must have changed pushrods over the years and renewed the needle bearing at the...
Hi, as you can see on the photo my old pushrod (top) was knackered by a collapsed needle bearing. I finally got the bugger out but the new bearing...
Course I don't WANT to see bikes wobbling around slowly but surely that's better than nothing if they refuse to re-schedule? And the fact that...
Thanks for your help guys, it's a pain of course but best to know something's knackered than not know! Seems a bit of TLC is in store, bloody...
Thanks for the quick help. Just to be sure, do you mean the bearing in the inner side of the pressure plate (which takes the tip of the pushrod),...
[ATTACH] I removed the clutch pressure plate and these fell out from somewhere - can anyone tell me what they are (and where they should be put...
