Separate names with a comma.
Applied......
Made my own for about £2 which incorporates an extra viton seal :p But fair play to the offerings above..... [ATTACH]
I'll echo antonye's comments, the site he recommended put me on the way. The old computer PSU route is good but I've actually had better results...
My version........ [ATTACH]
There are springs on the closing rockers that rotate the cams to the closed position when the belts are removed.
Sorry to be a pedant but you mean single phase (2-wire). Never seen a 2-phase system (which would need at least 3 wires) on a bike. Anyway that...
Unwanted xmas present. P&P about £8 because of the size (60x46cm) or collect from Newark. Cost £25 from Ducati, make me an offer. [ATTACH] [ATTACH]
Obviously you've identified them now but for reference Eastern Beaver (I kid you not!) offer a lot of the rarer connectors that often can only be...
When I changed the frame on my 748E for a 748R frame the original bolts were too long. They were 12mm diameter. I used spacers in this case.
Yeh I found those but I asked them for the dimensions before I shelled out a ludicrous amount of money. I found they wouldn't fit. As we know...
So I needed some chain rubs for my Magnesium swingarm. Having searched all over for some that would fit and failed miserably I set about thinking...
21mm (17mm on standard bikes) but as the others have said checking for the shower injectors and the cooling hose on the LHS of the bike is the way...
So...... I cycle home from work and prop the bike against the garage. Hmmm I think, you deserve a little time tinkering on the project so I stay...
For the pivot: 2520 (25x32x20) needle roller - 2 no. plus 2 seals 25x32x4 6005-2RS1/C3 (25x47x12) - 2 no. And if your doing the hub you want: SKF...
848 disc PCD 125mm OD 245mm The 1098 disc is definitely different.
You can have them for what it's costs to post them plus the price of a pint of beer in my local :Dead: I figure you are in the USA, they're not...
dtyellow996, I emailed you some CAD drawings. Guess you don't want these then. [ATTACH] Fitted, sorry about the dust. [ATTACH] [ATTACH]
Apologies if this has already been posted.
There is certainly high percentage of fluorine in Viton and it my well degrade into HF (can't say I've seen a reference to this) and of course...
As a generalization for petrol use: Rubber = Bad Nitrile = Good Viton = Better but more expensive
