Separate names with a comma.
I'm not 100% sure. it's quite large and has an elasticated bottom, so I'd suggest it would, although might be a bit on the large side
Ducati Performance bike cover (soft cover - inside use) - £25 (SOLD) [IMG] Ducati 1098R fuel tank, with pump and standard cap, excellent...
Standard pads are similar, if not the same as the SA pads. I went for the SC pads on my 1098R and they are a massive improvement (not that the SA...
Or this from Motocorse, although not for the 848 it would seem: Kit freno posteriore racing - Motocorse - parti speciali ducati, mvagusta e bmw,...
Up until recently this was available - Might be worth a call/email to them asking if they can still get hold of any. Rear Caliper Bracket & Rear...
Brand new HEL rear brake line to suit any model 848/1098/1198 with standard rear caliper & master cylinder. Red transparent coating, black banjo...
Saw a couple of Diavels at Loomies this morning, one red, one black. And then a 916/996/998 went flying past at Mach.1 with his arse on fire....
Yes, it's a breather tube that goes all the way inside the tank up to the filler neck where there is a small spherical valve/vent head internally....
I can get brake/chain cleaner in bulk very cheaply through a mate in the trade. The aerosols are poor value, which is why I buy the liquid in...
When i replaced the undertray on my 1098R with a carbon fibre item (never again), i fitted the TPO heat-shield kit, which i stuck down with a...
For the few minutes it takes to clean and lube a chain, it's not worth skimping on. I cleaned mine over the weekend with Wurth chain cleaner, and...
I had a full Termi system on my 848Evo and it sounded great. But........... I've got a full Akra system on my 1098R and that sounds even better!...
Tightly.......with a terrified look on my face. Thank god for dark visors!
Rats.....mine is fast approaching that mileage. Better start saving now for the big rebuild!
As long as they are radial calliper a with 100mm centres, both will work. Either of these forks will work with the 848Evo standard calipers.
Yes, FGRT803 or, if you want the higher-spec NIX30 equipped ones (Cartridge kit) you'll be after the FGRT210.
Thanks guys, I'm over the moon with the quality and fit, and for the money it's an absolute bargain. But, now I have the ordeal of finding a...
Mine was stuck fast - I had to use a narrow-pointed drift and tap it out. Don't forget to remove the circlip first though! I cleaned it up and...
Not sure about fibreglass, i know EVR make some larger items in carbon fibre, but they may only be compatible with their enlarged carbon-fibre...
