Separate names with a comma.
yoke stamp 1221 seems high for 99 bike,, most ohlins models are around that number,, iv got a dec 99 sps and its a 687
when its all done, you'll probably wish you had kept it all as it came out the factory
loosen the 2 allen bolts holding the seat locating pin at the back , (on the seat unit) move it forward about 3mm and retighten
Apart from 1 that’s not off 748 916 996 998
Fuel tank wanted , any thing considered ,, thanks
Sprag clutch without a doubt, left hand engine case easy enough to do, usual symptoms slow to turn over which is the main reason the sprag wears,...
I fitted some P4 CALIPERS to my 996, they are 65mm mount as opposed to the 916 40mm,, massive braking power with little physical effort and easy...
[ATTACH]
Mine comes up the exact model DUCATI 996SPS on gov.uk mot site
buy a 2nd hand 1 off the man in leicester , hes a good reliable bloke, had plenty of parts off him over the years and never any problems, he does...
ha the whole axle been replated ?? if so get some fine wet and dry flatting paper and clean the plating of the face that fits snugly into the...
at worst a suitable chip id say
the standard 996 clutch cover is similar to the engine colour, sps is darker, i have both models
It’s more than likely a standard 996 engine. Check for 2 pick ups / sensors on left hand side and are the crank cases smooth or rough ??? If it’s...
Well firstly you say the bikes a strada ?? And a 1998 correct me if I’m wrong some body but were’nt strada’s 93/94 ?? The reason I query this is...
sp sps and 996 heads dont have desmo moulded in to the top
iv done this twice before, ended up with no ignition light on both bikes and no neutral light on one, used the correct throttle bodies on both,...
There’s 1 on eBay https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F184031003882
gold frame up to 99 with showa front, 2000 and on silver frame with ohlins front,, looks about right from what you can see, appears to have an...
