Separate names with a comma.
Thank you. How would you suggest getting close with the idle speed adjustment? What gap should I target with the throttle closed as a starting...
That is my last resort. I have a set of carbs from another Superlight I am restoring that I had professionally cleaned and refurbed. I am first...
I am certain I was not. I adjusted the spring loaded screw in between the carbs right below the little indent in the airbox. This one: [IMG]
I bought the bike 4 months ago. The bike hadnt been ridden much as it was used in a display at a local motorcycle shop. The bike was...
Thank you everyone for your replies. I actually did replace the spark plugs. When removing the original ones, I noticed they were gapped at...
Hi gents, I recently acquired a mint 1993 Superlight that has less than 6k miles on it. Since I have received it, I have started it perhaps 4-5...
Thank you. I am definitely not an ECU expert and only have experience flashing 5AM ECUs. Anyway, a pretty well respected member on another forum...
Hello, I have a 996R with the 54mm full exhaust and matching ECU (part #96506801B). With this ECU the tachometer does not function at all. It...
Sorry for resurrecting an old thread. I just purchased a MOSFET regulator from Ricks, part #10_001H and have a question about wiring to the dash...
Rear wheel hub size is different. You will need to either swap your hub into the 1198 swingarm or buy a large hub rear wheel.
Search this Ducati part # on ebay: 54040301b. Its the Shindengen MOSFET regulator used in later model Ducatis/
Perhaps try listing on the 848/1098/1198 Facebook group? I sold the exact same tank in 15 mins for $1500 + shipping.
I am not so sure about this. Everyone I have talked to says retard on the 2002 748s Testa Bassa head was standard from the factory. Of course...
Thank you. I will take your advice to manually crank the engine to make sure the valves do not hit the piston. I think what I really need to do...
My parts manual for a 2002 748S specifies part #74172.1008 for the vertical exhaust which I believe does not have any offset. The key I have has...
Thank you so much for this informative post. I bought the bike used recently so I dont know too much about its history. The bike came with a...
Thanks guys. After talking to a few very knowledgable Ducati owners, I learned that on the Testa Bassa heads, the vertical exhaust is supposed to...
Like a dummy I didn't pay attention to the orientation of the woodruff key when I replaced the vertical exhaust camshaft. Does anyone know if the...
I had a well known motorcycle painter attempt to apply a matte finish over the gloss. The original owner of the bike had a spare, damaged side...
Just got back from a long day driving up to LA and back. Its too late and dark to take good pics but here is one of both my girls. Please dont...
