Separate names with a comma.
That pipe that comes from the bottom of the tank is just to allow overfilling the tank to bypass the hot engine and drip fuel on to the ground.
Not a fuse if you can hear the fuel pump prime. Quite possibly a split hose on the fuel pump inside the tank. You may be able to see if you open...
As mentioned, you only need to lock the vertical cams. The inlet cam is on the nose of the cam when in the timing position. The Desmoquattro is...
I've also taken my 748 to the track. They're a great bike and capable of very good corner speed but frustratingly underpowered out of the corners....
Most likely a faulty gauge. I can't think of any one wanting to set the rev limit beyond 11.5 unless for a race bike. You will see a massive...
It looks like the later 748/996 non suicide stand.
Yes, not factory original wiring
Travelling the West Australian Great Southern in summer 2 days ago[ATTACH]
That's where I come from. I got a pack of 6 for about $30
Make sure the thread under that bolt is clean. The fuel pump requires that bolt/screw to be tight on the flange or it may wiggle loose and cause a...
interesting! Would be great to see photos. I guess if it's a display bike even if it's a tight fit that would be OK. Or you could also shim it out...
Why would you want a 200 tyre? The 190 is better for riding IMHO
Forks are definietly Showa. Standard brake lines are one from master and there's a T piece on top of the front guard to direct to each caliper THe...
Don't mix different coolants. Sometimes they can react together and go gluggy and block the radiator and cooling system
That's great. It's a shame to see 25 year old 916s with 8000 miles. They are really good looking bikes but even better to ride My 2002 916 engined...
Not from 1994 but most of the parts will be the same https://drive.google.com/file/d/1M6nPfBwNteomtHH3kOmlehra9E6J4e1R/view?usp=drivesdk
This is what I used. Anything similar will work well[ATTACH]
I've been chasing one for a while as mine was leaking. Have gone with a S4 Monster one for now but the V panel doesn't fit as it's a curved...
I can't remember. It was about 4 years ago. I'm almost certain that they are the same, as in revertible back and forth. If you have a paddock...
I have a 1098 stand on my 916 748. It's a perfect straight swap. I think they are all black but you could sand off the paint or put silver on it....
