Separate names with a comma.
Hi Eran: It really helps to have the head in your hand and see how it all works. It is my understanding that the loaded gap approach is to help...
Some pics for fun: tiny shim, big emery paper: [IMG] Getting ready to test "new" shims - during actual testing, the pins were pushed all the way...
Hi Eran: Let's go back to basics. I pulled the heads off my old 81 MHR, in the warmth of my living room with good tunes playing and a beer on...
To fit new valve seals, you are going to have to remove the bottom lifter so a moot point! The best way (in my humble opinion) to do this is pull...
I hope you have test ridden an Enduro. I am sure the reason behind so many low, sometimes really low, mileage Enduros for sale is that the owners...
Eran: Before putting the barrels back on, put a thin coat of grease on the studs.
Binge watch Desmowerx on Youtube; one of the best channels there is. The fellow shows each step, parts required, tools required, all torque...
I'm sure every country has its own rules. In Canada, it is allowed: Switching — Daytime Running Lamps (28) Subject to subsections (29) and...
Hi Kevin: It's good to have more information. As the dealer has not mentioned anything wrong with the oil, i.e. it's all there and it's not...
When I replaced the dealers charging leads with my own, I did not remove the main connections so no power was lost to the bike.
Kevin: I "reported" this thread, asking that it be moved to the appropriate group. Good luck
FYI: https://www.bike-parts-ducati.com/ducati-motorcycle/Superbike/2010/848/848/FUEL-SYSTEM/123/45/0/123 I picked 2010 model year, see part #14
I could not find the Evo service manual but my bet would be that the 2008 848 manual is pretty close:...
Hi Kevin: If you'd not explained anything other than ran the tank almost dry and now it will not start, my first guess would be contamination in...
This valve is in a dirty location and hidden from view. It's no surprise that the first time it's looked at is the time it is suspected of...
We (collectively) are digging ourselves a very deep hole to fall into. Austria, Germany already banning or planning to ban bikes over a certain...
Saltspringer: I just compared my old pups with Derek's and they are the same; same part code 1214 212 118 but the number below on mine is 929...
Cooking of the pickup wiring is common on the 860 bevels so it doesn't surprise me if there are similar issues with Pantahs. There are a number...
I recall the resistance between my two yellow stator wires was less than 1ohm on the 81 MHR. My regulator end wires had brittle insulation and...
AS and AD are simply left and right; exactly the same but with the idle and throttle stop screws on opposite sides.
