Separate names with a comma.
No need for a new cylinder base gasket (unless its whacked for some reason), but you need the sealant, which is the ordinary gray three bond 1215
Either as you wont know how much ethanol is put into each from one year to another, changes all the time. Locally in sweden we have 95 and 98,...
Just pull your sled in there, go to ecu info and see what revision you got?
All I did was being a good soldier and performed exactly what Ducati tells you to do. Put system on and perform up map, nothing more nothing less....
You need to go above 9300 plus you need to be used to the power to notice it as its bloody quick at 165rwhp already. We had a couple of guys...
Just a thing happening to our 1299 demo bike this summer, it just wouldnt do top end numbers, itd do just fine to 9300rpm and then keep the same...
This you will have, I use the 19x18 with those discs and calipers along with EBCHH pads, simply marvellous setup.
Old belts are found at 60-80hz, refitting old belts is nominated to 80, which is right considering it all.
All suggested are heavy slugs no doubt, Ive been working hard on a different solution this fall, a husaberg 570 108kg wet no fuel with 72rwhp,...
Rear damper makes the ride a lot better and is sensibly priced at €6-700 or so.
2500€ or there about
Cartridge kit and rear damper has been around since autumn 2015 and can be bought through Öhlins, front fork kit is via Andreani, Andreani is a...
Öhlins forks and Roby Moto clamps, Andreani sells the kit.
Not really what I would buy, but it all depends on how its kited, did forks and clamps on this one, major improvement imo. Throw a tuned 1100...
Im humble to this as I know the effort, good job! For the 749S I have no clue to why its recommended with less overlap? Perhaps the stalling part....
Hmm. looks the opposite of what I usually do, what timing is that?
No problem with that no. Dial the cams radically and the two wont align perfectly on the same cylinder agreed, however try a full tooth off for...
Its the correct position for cams pre 2009. 2009 and on the vertical has the same pattern as your horisontal, that is the 'legs' of the T-shaped...
Agree they will last for a long time, know of several ds1000 engines with over 100'000kms on the clock. Weak point is the belt rollers, keep an...
MWR power-up kit makes another 4hp mid, right where you need it the most.
