Separate names with a comma.
Love it, if only we could have something on a monoposto. Not having any storage is a serious pain in the ass. I had a 98 R1 until it was nicked...
I recently had both front and rear suspension rebuilt by Revs Racing. I went with Ktech progressive springs in the front as they were quite...
Ha! You have the rare banana termi system for the black swingarm! Lucky sod :upyeah:
carbon wrap them
Told ya! If you look under the nose cone there is a small black cover. Remove this and on the inside of the fairing/headlight casing on the...
I think a multi is fine. Get a broom handle and if it goes through, it will fit. There is a guide to fitment on their website. Then its just...
Steve from Pragmasis was kind enough to allow me to play with a few of his different chains, looking at lengths, sizes and methods etc. The 19mm...
+1 16mm is fine, 19 is heavier. Plenty of info on their site and Steve (owner) is super helpful.
Then I would leave it alone and save yourself loads of grief. Dont get me wrong, it can be modified just fine but its not something I would want...
If you can download the manual the bolt sizes are normally in the torque settings chart. If not, its a bolt out and measure job
A few of us have these. Much nicer! http://securityforbikes.com/torc-ground-anchor.php Either 16 or 19 will do but depends on how you intend...
Er, no - the horizontal cylinder exhaust pipe from a grey swingarm model wont fit the black swingarm unless persuaded with a hammer.
Get it set up as they generally dont come with the correct compression or rebound either. Best money you can spend (unless your in the west...
I wouldnt bother. Grey swingarm means your options are much more plentiful when it comes to exhausts.
+1 To be honest, buy three as if its not been done your headlight one may be going too as they collect water and if either one is creating...
Get the suspension set up for you and you will love it even more! Makes a HUGE difference.
Hang on a minute chaps. Simples first. Firstly, can you upload a pic of the sight glass showing just how much emulsion is in the sight glass?...
If you dont have one you will need a long breaker bar as they are on tight and will struggle to get the nut off.
if your talking about the grey swingarm strange disk thingys then I thought a simple small screwdriver/allen key did the trick?
No, the speed sensor is the small black thingy attached to the back brake caliper bracket and pick up signals from the steel disk bolts. Oh and...
