Separate names with a comma.
Thanks for replying Standard Showa forks. Cool, will get some linear springs and do a thorough service with the ohlin oil. Think I put 10w in my...
I noticed these lines running across the tyre [ATTACH]
I just got back from parcmotor/Valencia, awesome tracks. I started to suffer some front end issues at Valencia, the front felt like it was...
That sounds like soooo much faffing about instead of making marks etc
Exhaust wrap? Might help if you like the look. FYI Just unwrapped my exhaust and it was in a bad way underneath, wire wheel bad... Is your heat...
defo gotta sort those throttle cables out, maybe the prev owner cut the locating pin off the throttle? not sure how the cables have ended up above...
Not a big job, watch Chris Kelly from California cycle works on YouTube and you'll be fine, and use Gates carbon drive app to measure frequency....
Cool. I've been looking at them too. It Might be worth pulling the covers off and looking at the belts for signs of wear, and feeling for belt...
Defo, there's some really helpful guys on here, and speak to exige when you need belts. Mine have the grey button on the left and also on the...
Also throttle cables seem to be in a weird route? Should be under the clocks , easy fix though:upyeah:
Need a bit more info to really help, what else about the wiring do you mean? Is the front brake banjo switch connected? It's hidden in the pic?...
Lol, true, not a waste though if you're spending it on a Ducati :cool: I only asked because, well I'm nosy :))) and it's got the black swing arm...
Very nice! really like the colour :upyeah: maybe not the frame, but that could just be the light in these pics. Is it a 2nd gen 'S' with first...
Could try removing the lid on the reservoir and pushing the piston or pads in to the caliper?
Its an engineering masterpiece and 143kg/170bhp is impressive, i just dont like some of the styling choices... I really dont like the tail unit,...
New bearings and belts fitted. Replaced oil, filters, plugs at the same time. Bike sounds great, belts are sitting much better on the cams now....
Sorry, I meant the idler felt tight coming off, like it had been tightened to more than 26nm previously. Will stick with 26nm on the rebuild then....
I'm in the middle of replacing the idler and tensioner bearings on my 05 749s, I read the torque settings are 26nm for both but the idler seemed...
Are the symptoms the same on both cylinders? I haven't worked on a ducati carb before but if the needles arent closing that would allow fuel...
I have an 05 749s, and love it. but...I do get left behind on straights by my mates on 1000's so am dreaming about a 999s engine in the future to...
