Separate names with a comma.
The gun we used was the Mac Tools version Blows per Minute 0-2,400 Breakaway torque 1200 ft-lbs. (1,625 Nm) Free Speed [RPM's] 0-400/1900/1900...
Its the Showa shock..
So the saga continues and the bolt is still solid, has been soaking in diesel for a week from the shock side, bought an industrial grade impact...
Hi, parked up today and while I was away a van parked sort of next to the bike and clearly has a fuel leak, when I got back my rear tyre was sat...
Thanks for your input guys, Iv sealed the hole in the bottom of the swing arm so I can fill around the stuck bolt with diesel, Iv borrowed a 1/2...
Hi, so still attempting to get this bolt out, bike is lying on its side so hopefully the penetrating oil is soaking the thread end that I cannot...
Thanks guys,, ill try a shorter Snap On bit, just been looking again and if I grind literally .5mm off ill get it through the hole in the arm, iv...
Hi, looking for a bit of help here again, I need to remove the rear shock for a service and new spring, the bottom bolt is recessed quite deep in...
So just to let you guys know, the bike was set up again yesterday by L2 Servicing who I would definitely recommend if you are in the south, Andy...
As per Chris above, wire repaired, flat spot gone.. Hurrrrrrrah!!!!!!!!
Hi Chris, Thanks you, ill pull it apart and send the pics later today..
Hi Chris, I am looking for someone to check over and possibly remap the ECU for my 848 and it appears you may be the man.. I have been told by Pro...
Blimey an AS1 yammy, I started my Moto career on a YDS7, love the old Yamaha twins, like you say a bit irregular with the whole running on two...
Hi Chris, thanks, I don't really know what the issue is or even if there is one to be honest, like I say the motor runs fine and is always happy...
Thats awesome news, so glad they found the fault and got it sorted for you. Why was the oil leaking, I assume the valve covers, not screwed down...
I will, looking to get the ECU refreshed back to standard with slip on Termi cans, hoping this will fix it, going with no lambda, exhaust valve...
I don't know yet, Im picking the bike up tomorrow and will find out then but open to suggestions, who's Terry?
Thats great news, troubles over, unfortunately not for me, diagnostics can see no fault so it is being recommended that the ECU is sent away to...
Thanks....
