Separate names with a comma.
If it stops working taking the bolts out will not solve the issue. The tank cover has to come off with the filler in place or you will snap the...
Or you can use Ventura kit with a givi plate.
My QS works perfectly both ways, no issues after I learnt to use a slightly heavier foot pressure. Keeping in mind that they were developed for...
That’s possible, but I was told that each dealer can only order a very small number to stock, each bike is specific to a customer order. Certainly...
It’s possible That they are now doing that, but trying to do that when everyone in Italy is locked in their homes including suppliers and...
Spy shots of test bike show: 19” front wheel Double sided swing arm Narrower than 190 section rear wheel
Yes ........ but less than paying a dealer for the service Yes ........ ignore it and dealer can turn off at next major. And bleeding these...
Worth checking on the Rizoma site, but I’m fairly sure that Ducati have used the same lever setup for years. So the answer is probably yes.
Rizoma levers. www.ebay.co.uk/itm/153960156565
Rizoma levers on eBay. www.ebay.co.uk/itm/153960156565
Perhaps this will help as I had a similar issue on the latest pikes peak. The biggest nut is probably the cap itself, undo that and the spring...
1 = rebound 2 = preload smaller nut is not used for setting Compression is at the bottom of the fork....
I suggest you dump the plastic water pump cover before it causes “rot” lovey bike.
That’s right you can. However you’re reliant on Bluetooth again and it’s good but not perfect. Hard wired never fails. :upyeah:
I’m a massive Garmin fan and have not been without one since their Quest model. Love the look of the new XT, and I hope it works well for you but...
Now keep in mind that I’m around 14 stone and 5’11”, so I guess fairly average. So after lots of adjustment and measurements with my wife roped...
So as the manual specifically states front preload as 10 max, is there a danger of going over ? If so what?
Thanks for your input, Ive just come off a skyhook DVT to the new Pikes. Ohlins is totally different. But what strikes me as strange is the front...
There must be a suspension guru somewhere in here :bucktooth:
Here’s a question that I hope another 1260 pp owner may help with. Ohlins front forks preload. Book states 1 turn = 1 mm. also states 10 mm = max...
